Where to mount a phone holder on the windscreen

The best position to anchor your phone mount on your car should be at the furthest corner of your screen. It should be slightly above your wheel. Also, ensure that it doesn’t obscure the visibility of the road ahead.

Additionally, make sure that the phone mount has stuck to the screen properly before beginning the journey. This will eliminate the chances of it coming off when driving.

It is not advisable to put your phone at the center of the screen. This destructs you from concentrating on the road. It is also difficult to interact with your phone in this position.

Many countries do not allow windscreen phone mounts, It is good to first check with your country’s traffic regulations before affixing it to the screen.

How to mount a phone holder in your car’s vents

Ventilation phone mounts clip in onto the vents blinds easily.

You mount a phone holder by gently pushing it on one of the vents’ blinds until you hear a clicking sound. This means that the phone mount has properly and firmly held onto the blinds.

Clip it on the vent cup that is closest to you.

But first, you must have bought a vent cup, phone mount.

Check out our ventillation cup phone mounts below.

Can you use a bicycle phone mount on the motorcycle

Most phone mounts for bicycles can adapt to the motorcycle handlebar.

Motorcycle handlebars are slightly wider in diameter compared to the ones on bicycles.

Bicycle HandleBar
Bicycle Handlebar

However, manufacturers understand that the need for phone mounting cut across cyclists and motorcycle riders and that most of them own both forms of travel. They know too well that there is no need for having separate phone mounts for each mode of transport.

Motorcycle Handlebar
Motorcycle Handlebar

Phone mounts anchors nowadays are designed to fit a varying length of handlebars diameters. The mount’s handlebar anchor has a lever that makes it easy for it to adapt to most handlebars, be it a bicycle or a motorcycle.

You can click “read more ” on the mount below to see its specifications.

Where to mount your phone holder on your motor cycle.

We recommend you dock your phone mount at the following locations.

  • On your motorcycle’s HandleBar
  • On your motorcycle’s side mirror-Make sure not to obstruct the view of your mirrors.

How to secure your phone on the motor cycle.

Most Motorcycle phone mounts come with solid locking mechanisms. Such include, quad locking, zipping, lock button/knob, and so on. Ensure that you push the right button to secure your phone in place. Read the manual that comes with the phone mount for directions on how to use it on your motorcycle.

Do you need waterproof Motorcycle phone mounts?

Click this link to find out the best waterproof phone mount options.

Recommended MotorCycle mounts in our store.

Where to mount the phone in ford fiesta

The Ford Fiesta car has an arguably small windscreen and therefore, placing anything on the top of the dashboard or on the windscreen itself will obscure the visibility of the road ahead. Therefore, these are not safe positions to mount your smartphone holder.

Below are two plausible positions you could mount your car phone holder on a ford fiesta. You can read further down to learn how to install the phone mount on these locations.

Ford Fiesta
  • You can mount the phone holder on the vents
  • You can mount the phone holder on the ford fiesta cup holder.
How to mount the phone holder on Ford Fiesta Vents.
vent phone mount
Phone mount anchored on a ventillation cup

Choose the vent cup you want to mount your smartphone holder on. We are hoping that you have already purchased the best car vent phone holder.

Then softly push in the phone mount connector to the vent cup blinds until you hear a clicking sound. If you hear the sound, it implies that the phone holder has clipped onto the vent.

You can then go ahead and mount your phone onto the holder.

How to mount the phone holder on your Ford Fiesta cup holder phone holder.

If you have already purchased the Cup holder phone holder, then you can go ahead and affix it into your Fiesta’s cup holder.

Installing is uncomplicated, the cup holder phone holder comes with four strong contact points that perch onto the interior of your car cup holder. They give the phone mount base a steady stay in your car’s cup holder.

To lock this kind of phone mount into your car’s cup holder, you simply do a simple twist on the holder’s base which then automatically activates the lock.

Once the lock is active, you are guaranteed a steady phone mount for the journey.

You can check our cup holder phone mounts below.

Where to mount the phone in jeep wrangler

Jeep Wrangler Dashboard

The top part of your Jeep wrangler has limited space for mounting your smartphone.

However, this is not to say that you can no longer use your phone conveniently in your newly acquired jeep wrangler.

Here are two possible locations you could mount your smartphone on your jeep wrangler. Read further to see how to connect your mount to your Jeep.

  • Mount it on your Jeep Wrangler Vents.
  • Mount it on your Jeep Wrangler cup holder.
Ventilation cup mounting

Since the jeep wrangler windscreen is not large in size, using a windscreen mount will obstruct the view of the road ahead, therefore, the only option is to mount it on the ventilation cup.

The vents for the Jeep Wrangler are located at a convenient position easily accessible to you. You can easily use your phone even with a single hand if the phone holder is connected to your vents.

Ventilation cup phone mounts are easy to install. You do not require any tools to install. Mounting them on the vents is as simple as ABC. You just push in the phone mount connector onto your vent and it automatically clips in.

However, do not force it in or you may end up breaking the ventilation cup blinds. A gentle push will do the trick.

Most ventilation cups use gravitational pull to lock in the smartphone every time you slot your phone onto the phone holder.

You can click this link to learn more about how vent cup phone mounts work.

Cup holder phone holder.

Cup holders are great locations where you can mount your phone holder in your Jeep Wrangler.

They provide a sturdy grip to your phone mount to deter any trembling from your vehicle and in the end eliminating any bouncy movement of the mount.

Once you mount your phone, it seats snugly and you get to enjoy uninterrupted interaction with your smartphone.

Cup holder phone mounts base come with solid contacts that launch onto your cup holder interior. You just make a simple twist to your phone mount base to activate the lock. Once the lock is in place, the mount stays in place unless you choose to manually remove it.

You can click this link to learn more about Cup holder phone holders

Where to mount phone in mini cooper

The mini cooper dashboard is usually small and we understand that you may be confused about where to mount your phone mount.

We recommend you mount your phone on the cupholder.

The cup holder is a little bit lower than your dashboard and therefore, attaching your phone mount will remove destruction on your dashboard.

Furthermore, a cup holder phone holder is much more sturdy than any other phone mount.

You can click this link to view our cup holder phone holder category.

Alternatively, you can choose to mount your phone holder on your mini cooper ventilation cup.

However, choose a ventilation phone mount that is not huge. A simple phone holder which is easy to use would be the best device to use in your mini cooper so that you have a clear view of the road ahead devoid of destruction.

You can click this link to view the best car ventilation phone holders

Do vent phone mounts work?

vent phone mounts

Most people have this worry on whether ventilation phone mounts really do their job.

Most of our customers always ask, “Do vent phone mounts work ?”.

The answer is yes, vent phone mounts do work. The installation procedure of the vent phone mounts determines whether your phone holder will remain steady for long.

What you need to do is to ascertain that the phone mount clips in properly into your ventilation cup. Also, ensure that the ventilation cup you choose has strong and steady ventilation blinds. This way, you are assured of a rock-solid grasp of your phone with no chances of bouncy movements when you drive through rough or bumpy roads.

You can check other phone mounts by selecting a category below.

Best Vent phone mount alternative.

If you are that person in the balance on whether to go for vent phone mounts or not, we have a better alternative for you that will hold out against any degree of trembling from your vehicle as you drive.

Why not try a cup holder phone holder.

For this category of holders, they go straight into your car’s cup holder. We know that cup holders are located just below your dashboard and therefore, mounting your phone in this location removes obstruction on the dashboard leaving you with a wide view of the road ahead.

Cup holder phone mounts strongly fit into your cupholder and gives you a sturdy mounting point. Most of them give you a 360 Degrees rotation of your smartphone and therefore hands you multiple viewing options of your smartphone.

The cup holder phone holder also assured you of a firm and secure grip on your phone for the whole journey.

So if you are up in the air on whether to purchase vent phone mounts or not, you can consider our cupholder phone holders below.

Best wireless car charger in Australia

Are you looking for a better car charger that will fill up power to your smartphone in Australia?

Then you are in the right place.

best wireless car charger in Australia

We have prepared a list of the best wireless car charger in Australia today to choose from.

5 best wireless car chargers in Australia

Here is an in-depth review of the top 5 wireless car chargers in Australia.

Best wireless car charger in Australia :15W Smart Fast Charging Mobile Phone Holder for Car

If you have a variety of phone sizes, this is a perfect choice for you.

The reason being, it can adapt to many phone screen sizes.

It also has a robust base where your smartphone rest.This ensures that your phone is always secure even on rough roads.

The handles on this wireless car charger are metallic. They offer a firm grip on your phone.

The locking mechanism is gravity-activated. Once you slot in your phone, it hits the bottom handles that then activates the locking mechanism. Once locked, it is safe and secure.

Keep reading below

This phone mount with wireless charging is meant to affix at the ventilation. This means it can fit in most motor vehicles in Australia.

Fixing this Wireless charger is easy. You don’t need any tools to connect it to your car dashboard. The prongs automatically hold on to your ventilation. It will not wobble of coming off.

The ball joint on this phone mount can rotate a full 360 degrees. It affords you the comfort of getting the perfect angle of using your wirelessly charging phone mount on Australian roads.

This is one of the Best wireless car chargers in Australia in our store

You can click this link to view more specifications

IPhone Samsung Car Gravity Wireless Charger Mount Quick Charge Suction Cup Bracket Car Phone Holder Car

This holder is simple to install and use.

It can stick on the windscreen or on your dashboard.

It uses the suction mechanism to affix on to your dashboard.

It has a superior wireless charging mechanism to guarantee the quick charging of any smartphone. Click here to check the best iPhone car mount

iPhone users would like this wireless charger as it does its job pretty well.

The long arm swings from right to left. It can also make top-down movements(270 Degrees). Additionally, the arm is retractable. These attributes allow the user a multitude of positions in which they can put this phone. You can never miss a comfortable angle for phone usage with these wireless phone holders.

It also has a ball joint that enables 360 degrees rotation.

The clip arms are gravity activated meaning no complex locking features.

Features

  • Type: Wireless Charger Car Mount ,Qi Wireless Car Charger
  • Install Way: Air Outlet Clip Suction Cup Bracket Base
  • Fix Positions: Air Vent Mount / Dashboard / Windshield / Table / Smooth Surface
  • Output Current: 9V 1A
  • Suitable: for 4.0-6.5inch Smartphones
  • With Charging Cable: 1M Micro USB Cable
  • Feature: for Samsung Wireless Charger , for iPhone Wireless Charger

You can click this link to view more specifications

Mpow CA032 Universal Car Phone Holder For iPhone X Phone Holder Windshield Mount Gravity Sucker Car Adjustable Dashboard Holder

Most car owners in Australia will love this wireless car charger phone mount.

It has a striking outlook that will complement the exquisite appearance of your car dashboard.

It comes with padded clip arms. This is to protect your phone from possible scratches.

The arm is retractable and can swing in multiple directions. It comes with a ball joint that allows the wireless car charger phone mount to twist 360 Degrees.

The locking mechanism is Gravity activated.

This phone mount can affix on both the dashboard and the windscreen.

It can adapt to many screen sizes therefore, you have a chance to use multiple screen sizes of your phone.

You can click this link to view more specifications

Wireless Charger,Auto-Clamping Air Vent Phone Holder 10W Qi Fast Car Charging Mount For iPhone

The best thing about this charger is the auto-clamping feature. It has a sensor that autodetects when the phone is close to the mount and then it opens up. Once the phone is slot in, the phone holder cramps on the phone automatically.

The wireless charging on this car phone mount is Qi certified. It charges your phone super quick.

You can click this link to read the full review of this wireless car charger.

QI Standard Magnetic Car Phone Wireless Charger Dashboard mount

If you are that car owner in Australia and likes magnetic car mount, then this one is for you.

It is meant to attach to your dashboard vents.

It is small and therefore will not add distraction when you are driving.

It has a fast Qi-certified wireless charging capability

You can click this link to purchase the item above

Check out the products we reviewed above down here.

6 Best phone mount for BMW

BMW dashboard

BMW is at the top of the range when it comes to posh and exquisite vehicles. That said, you require the best phone mount for the BMW dashboard to complement its already attractive interior.

We have prepared a list of top-notch phone mounts for your BMW car.

6 Best phone mount for BMW vehicle.

  1. Magnetic Suction Cup Car Phone Holder For IPhone Android Phone Holder Windshield Dashboard Adjustable Slide Car Mount Holder New
  2. OBSHI,Universal Car Vent Gravity Phone Holder Bracket For iPhone Samsung Smart Phone
  3. 15W Smart Fast Charging Mobile Phone Holder for Car
  4. Baseus Gravity Car Phone Holder 360 Rotation CD Slot Mount
  5. Gravity 360 Degree Dashboard Air Vent Support Mount Clip
  6. VicTsing Phone Cup Holder for Car Universal 360 Rotating Adjustable Gooseneck Cup Holder Cradle Car Mount for Phone Black

Here is our in-depth review of the BMW phone mounts above.

1.Magnetic Suction Cup Car Phone Holder For IPhone Android Phone Holder Windshield Dashboard Adjustable Slide Car Mount Holder New

If you are that person who wants to move with the trends, probably you might be a proud owner of the latest iPhone in the market today.

The latest iPhone back cover will allow magnetic attachment, a factor that is very important when deciding on the best phone mount for your BMW.

The phone mount below works by way of the magnetism concept. It comes with a small magnet attached.

Once you place your phone on top of it, it immediately attracts and holds it firm and secure.

Most customers love it as it is not bulky and is easy to install. Its size is not noticeable on your dashboard and therefore does not distract the exquisite look of your BMW car interior.

This phone mount will go straight on top of your dashboard. It uses the suction concept to affix onto your dashboard. Just locate a position that is comfortable for use and attach it. Once properly installed, it won’t wobble or come off under any driving conditions.

The Knob where the phone rests is can easily slide from top to bottom. On top of that, it comes with an adjustable ball joint that can swing a full 360 degrees to meet the demands of any user when it comes to angle positioning.

The beauty about suction cup phone mount design is that they can fit on multiple locations e.g on the dashboard or on the windscreen. If you feel that you do not want any distractions on your BMW dashboard, you can always attach it to the windscreen.

You can click this link to view its price.

2. OBSHI,Universal Car Vent Gravity Phone Holder Bracket For iPhone Samsung Smart Phone

This is one of the best phone mounts for BMW according to our customers.

The major reason that they love is that it is hassle-free, that is in terms of installation and use.

You do not require any tools to install this gadget. It comes with prongs that go straight into your BMW’s ventilation openings. Once you slot them in, they automatically hold in place. They are made to attach firmly to protect your phone from falling off with the mount.

This BMW mount uses the gravitational pull of your smartphone to activate its locking mechanism.

Once you drop your phone onto this phone mount, it hits the bottom contacts that then activate the side holder to grab your device.

Removing your phone is fast and quick. Once you start removing the phone, the phone weight on the bottom contacts of this phone mount is released consequently activating the unlocking mechanism of the phone holder.

You can click this link to view its price.

3.15W Smart Fast Charging Mobile Phone Holder for Car

You don’t want instances where you arrive at an important meeting but your phone has already run out of power.

The best remedy for this is having a car phone mount that not only securely holds your phone in transit but fills it up with power as well.

The standing out characteristic of this phone mount is its ability to charge your phone wirelessly.

It has Qi charging inbuilt. Just attach the charging cable to your car’s USB port and whenever you drop your phone onto this phone holder, wireless charging immediately kicks in. Your phone has to have qi-charging enabled though for you to enjoy this feature.

The locking mechanism works as described in the phone mount we have seen in number 2. However, the phone grabbers of this particular phone mount are metallic, this simply means that they will serve your BMW for a long time; this one is durable.

It has a wide base design where your phone rests. This factor allows the phone mount to accommodate a varying range of screen widths. It means that you don’t need to change your phone mount every time you buy a wider phone than the previous one you had. It will adapt to your new phone feature.

As for positioning, this phone mount allows 360 degrees rotation. You will never miss a perfect position with this device.

  • Color: black
  • Product material: ABS+fireproof PC
  • Input: 5V/2A 9V/2A 12V/1.5A
  • Output: 5W/7.5W/10W/15W (MAX)
  • Product size: 99.84*105.76*57.82mm
  • Charging distance: ≤8MM
  • Applicable mobile phone size: 4.5 inch ~ 6.8 inch

You can click this link to view its price.

Click this link to learn about the best iPhone mount for your car.

4.Baseus Gravity Car Phone Holder 360 Rotation CD Slot Mount

This one works with the gravitational pull aspect of locking and unlocking the system.

It has an attractive outlook and will complement your striking BMW dashboard.

The metallic holders are strong to withstand crazy road drives like bumpy roads, rough terrain, and driving up rocky mountains.

The standing out feature on this device is where it’s made to affix on your dashboard. It is specifically made to go into your motor vehicle CD slot. This entry point makes the device stable and therefore guarantees the safety of your phone.

You can click read more on the device below to purchase

5. Gravity 360 Degree Dashboard Air Vent Support Mount Clip

This one is a simple plug and plays device.No no tools are needed to install it. It goes into your vents and can work with both vertical and round ventilation.

The contacts have a soft covering to protect your phone from reaching the metallic part and in event protecting against scratches.

It utilizes a gravitational locking mechanism like the devices we have seen above.

It occupies a small space on your dashboard and therefore your BMW dashboard looks clean and decluttered.

The adjustable ball joint provides you with a variety of viewing angles. It can rotate a full 360 degrees.

You can click read more on the device above to make a purchase.

Read More: Best cell phone holders for your car

6.VicTsing Phone Cup Holder for Car Universal 360 Rotating Adjustable Gooseneck Cup Holder Cradle Car Mount for Phone

If you like minimal distractions from your dashboard, then a cup holder phone holder is all you need. The cup holder is always a level below your dashboard and therefore when your phone is at this level, phone alerts will never distract you as your eyes are always on the road and your phone is far from your angle of sight. You can only use your phone only when you really need it. In fact, most of our customers say that this is the best phone mount for a BMW car since it gives you peace of mind as you drive.

  • Long gooseneck gives you an oportunity to position your phone at an angle most comfortable to you as it is made from a flexible stainless steel..
  • Comes with protective cushion at the base and the grabbing hands to safeguard your smartphone from vibrations and possible scratches.
  • Adjustable ball joint gives you a 360 Degrees rotation
  • It can accomodate most smartphone screen sizes in the market today.

Click this link to purchase this phone mount for your BM

You may also be interested in: Prius Phone Mount

best ps4 phone mount

best ps4 phone mount
PS4 Controler

Sometimes it is fun to play our favorite PS4 games on your iPhone or Android phone especially when you are not close to a large screen i.e when traveling on the subway or just relaxing on a park seat.

A ps4 phone mount comes in handy as it offers solid support for your phone and controller. It marries them in to give you a flawless interaction with your smartphone.

There are not so many ideal solutions for supporting your controllers and your phone simultaneously.That is why we have taken it upon ourselves to research and come up with a list of the best ps4 phone mounts to help you in the journey of finding a classic ps4 phone mount.

Here are is the best ps4 phone mount in our store.

For PlayStation PS4 Game Controller Smart Mobile Phone Clip Clamp Mount Holder For PS4 For IPhone 12 Xiaomi Samsung Phone PUBG
Our best ps4 phone mount

If your phone is between 3.5 all the way down to 2.6 inches,this PS4 smart phone mount is a perfect pick for you.The black clamp on this phone mount can adapt to any phone within this size spectrum.

The knobs on both sides are used to lock in the clamp once you decide on an angle to play in.They are made of reinforced ABS material to make sure that the hold stays.It is actually the sturdiest ps4 phone mount in our store.

This one is ahead of its game when it comes to your PS4 usability.The ps4 phone mount clock around the knob to ensure that you can locate the perfect angle for you.It allows rotation of the phone clump a total of 270 degrees.With this kind of flexibility,your gaming experience will be out of this world with this phone mount.

The part that wraps around your controler made of a transparent plastic.This is made so to ensure visibility of all controls from all angles.This ps4 mount controler wrapper will not obstruct the paddles nor intefere with your analog keys.It also leaves your charging port unblocked for you to easily insert your charger.

The touchpad is not blocked.The wrapping setion of this ps4 mount passes on the sidelines of your controller touchpad.Scrolling with this phone mount has never been easier.

Specifications

  • Type: Phone Clip Holder for PS4 Controller
  • Platform: Sony PlayStation 4
  • Fits Phones Size: Width 3.4 inch/88mm
  • Material: ABS
  • Color: Black
  • Comes with one data cable

You may also like our Multi-Purpose Gamepad Holder below

4 best ATV phone mount

ATV riding involves a lot of rumbling on your handlebars as most of the time you use it off-road. That means you will require the best ATV phone mount to withstand these conditions. That said, we have prepared a list of top phone mounts to serve your holding needs better.

Best ATV phone mount
ATV

Best ATV phone mounts

A revew of the top ATV phone mounts

12V Motorcycle QC3.0 USB Qi Wireless Charger Mount Holder Stand for Cellphone 32CB

For a sturdy grip and minimal trembling, this is the best phone mount option for your ATV.

It has four contact points that hold all four corners of your phone. This kind of structure prevents your phone from slipping.

It has a quad lock mechanism. Once engaged, it gives your phone a super firm grip.

12Volts wireless charging is a feature that you would like on your phone mount. When out in the fields you do not want to run out of power. You want to keep recording and taking pictures all day long as you drive through.

What about phone sizes handling?

Well, this one can adapt to varying screen sizes in the ranges of between 3.5 to 6.4 inches.

This phone mount comes with two mounting units. One can be used to attach to the ATV handlebar or you can use the second one to attach the phone mount to the side mirror.

The ball joint can rotate a full 360 degrees to allow you to position your phone at the most convenient angle for you.

Installation of this holder is straightforward. You just need to screw the mount onto your ATV handlebar.

You can click this link to purchase this elegant device.

Baseus Bike Phone Holder Universal Motorcycle Bicycle Phone Holder Handlebar Stand Mount Bracket Mount

To ensure that this phone mount firmly holds on to your ATV handlebar, it has a double locking factor. First, you screw it in, then you press the mechanical lock.

With such a kind of mounting mechanism, this ensures the smartphone seats snugly even on rough rides.

The part that holds the phone is easy to remove and lock in whenever need be. It also has tensile springs that hold strongly onto the phone. The springs can extend to adapt to different smartphone sizes. So do not worry about coming from your house with a different phone every day.

With this phone mount, the phone controls and screen are not blocked and therefore, it is super easy to access all phone controls as you race.

It is easy to switch your phone orientation from portrait to landscape as it has an adjustable ball joint that makes move a full 360 Degrees.

This is the best ATV phone mount on our list.

You can click this link to purchase this elegant device.

Bicycle Phone Holder CNC Motorcycle Handlebar Mobilephone Support Aluminum Alloy 360 Rotation MTB Road Bike Mount Accessories

A metallic phone mount means that you will have a solid rock phone grip on your rides.

This is an aluminum phone mount that will last you days on end. It has a screwing knob that you use to fasten your smartphone onto this mount.

It can extend to accommodate different sizes of phone width as well. It doesn’t hide your controls as well.

You will be amazed that this phone mount rotates 360 degrees. This gives you an opportunity to position your phone in either a horizontal or vertical position.

You can click this link to purchase it.

Metal Bicycle Phone Holder Bike Motorcycle Handlebar Clip Stand For iPhone X 11 8 7 Mount Cell Phone Holder Bracket Support

This is another strong holder. It is metallic and has moving parts. It has a knob for tightening your phone onto the holder.

You may also be interested in Harley Davidson Phone Mounts

6 best phone mount for Prius

Toyota Prius has one of the exquisite dashboards in the Toyota personal car vehicle spectrum. You will need a cool-looking phone mount that will blend with the posh-looking dashboard.

best phone mount for Prius

We have prepared a list of the top phone mounts you can pick from for your Prius car.

Here are some Best Phone Mounts for Prius Car

  1. Wireless Charger,Auto-Clamping Air Vent Phone Holder 10W Qi Fast Car Charging Mount For iPhone
  2. 15W Smart Fast Charging Mobile Phone Holder for Car
  3. Mpow CA032 Universal Car Phone Holder For iPhone X Phone Holder Windshield Mount
  4. 360 Degree Rotation Car Windshield Auto Dashboard Phone Holder
  5. #H40 New 360° Car Mount Adjustable Gooseneck Cup Holder Cradle for iPhone 11pro/Pro Max Samsung Huawei Xiaomi Cell Phones
  6. 360° Rotation Car Mount Phone Holder Rearview Mirror Bracket Black For Cellphone Dashboard Stand Holder Car Mount Dropshipping

Here is our in-depth review of the best phone mount for Prius motor vehicle above.

1.Wireless Charger, Auto-Clamping Air Vent Phone Holder 10W Qi Fast Car Charging Mount For iPhone

Want a hustle-free usage of your phone while in your Toyota Prius?

Then this is a perfect phone mount to meet your every need.

This phone mount not only holds your phone but also charges it on the go. Most buyers say that it does an amazing job of firmly holding onto their iPhones as well as filling them up with charge at the same time.

Even further, it comes with an auto clamping feature. This eliminates the aspect of always fumbling with controls that is common with other phone mounts. A Prius owner would like something automatic which is what this phone holder is good at.

Once your phone comes close to this phone mount, it automatically opens up. The inbuilt sensors on this device work to recognize phone presence and therefore does the magic of opening up.

Once you slot your device onto this Prius phone mount, the bottom contacts ignite self-activated closure, securing your phone in place. The grip is strong enough to ensure that your phone doesn’t fall even on the roughest terrain.

To remove the phone from the holder is easy and quick, it is just a simple tap with your finger and this Prius phone mount disengages.

Installation of this phone holder onto your dashboard is a straightforward affair.

No tools are needed to affix this gadget. It comes with prongs meant to slot into your vehicle’s vents. Once properly installed, this holder holds onto your ventilation firmly. It will never wobble or come off unless you decide to manually remove it from your dashboard.

Want to know more about this wirelessly charging car phone mount?

Click this link to learn more or you can go ahead and purchase it here.

2.15W Smart Fast Charging Mobile Phone Holder for Car

Our customers love this phone mount majorly because of how it quickly charges their phone. If you are a heavy user of your phone and you frequently find yourself out of battery power, then we got you covered. This one comes with a QiCharging feature compatible with all phones that support Qi-Charging.

It is robust too and can adapt to many phone sizes including those with thick phone cases.

Installation: This one goes straight into your Prius vents. The prongs clip in and automatically holds this phone mount into place.

Usage: Once you slot in your phone, the phone mount bottom phone contacts are pushed by your phone and in the event activates gravity locking. The side contacts also hold onto your phone.

The phone contacts on this phone mount are metallic. This is deliberately made so to guarantee a firm grasp of your phone so as to withstand any shaking or vibrations. Metallic holders are also durable and therefore, this gadget will serve you for the longest of time.

Your phone rest on an ABS base, this is made so to ensure that your phone does not suffer scratches.

Qi-charging automatically senses your phone presence on the holder and charging automatically kicks in.

Our customers have said that this is one of the best phone mount for Prius so far.

  • Color: black
  • Product material: ABS+fireproof PC
  • Input: 5V/2A 9V/2A 12V/1.5A
  • Output: 5W/7.5W/10W/15W (MAX)
  • Product size: 99.84*105.76*57.82mm
  • Charging distance: ≤8MM
  • Applicable mobile phone size: 4.5 inch ~ 6.8 inch

Click this link to learn more or you can go ahead and purchase it here.

3.Mpow CA032 Universal Car Phone Holder For iPhone X Phone Holder Windshield Mount

Toyota Prius has a wide dashboard where you can affix this gadget.

It uses a suction mechanism to attach to your Prius dash surface.

Once installed, the gadget is safe and secure. The suction pad adheres tightly and the phone mount is ready for use.

The telescopic arm retracts and can extend from 11.8cm (4.6in) to 16.8cm (6.6in). The other beautiful factor about this phone mount is that the arm can move up and down. These aspects coupled with 360 degrees rotation capability makes this one one of the best phone mount for Prius cars. This kind of design allows you to position your smartphone at the perfect viewing angle and therefore you can have stress-free cruising in your Toyota Prius.

The soft cushions on the contacts prevent any scratch possibilities and protect your phone from any kind of vibrations.

It has a gravitational locking mechanism. Any time you slot your phone onto the mount, the bottom contacts automatically activate the locking system. The side contacts then tightly hold on to your phone.

This phone mount can adapt to a variety of phone sizes,up to 6 inches actually.

  • Compatible Brand: iPhone 8/7/7 Plus/6/6S Plus/5/SE 4S, Samsung Galaxy S8/S7/S6/Hornor 10
  • Material: ABS
  • Rotation: 360 degree rotation
  • Usage: Phone holder/GPS holder for car
  • Magnetic: No
  • Compatible: For 4-6inch smartphone

Click this link to learn more or you can go ahead and purchase it here.

4.360 Degree Rotation Car Windshield Auto Dashboard Phone Holder

This one is another suction cup phone holder you can use for your Prius.

Installation of the suction cup on the dashboard is easy and quick. The adhesive on the Cup is reusable multiple times, you just have to wash the dust off with water once in a while.

It is beautiful and will complement your Toyota dashboard.

It has a retractable arm that can go up to 20 cm in length. The arm can move 270 degrees sideways. However, the 360 degrees ball joint expands the number of angle positions you can put your smartphone in.

This phone mount for Prius utilizes gravitational pull to activate the locks. Once you slot in the phone, the side contact grabs firmly onto your phone.

It has an inbuilt shock absorption to ensure that your expensive phone is safe and secure.

You have the freedom to install it on the Dash or on your windscreen, it all depends on your countries road usage regulations.

You can click this link to learn more about its specifications and pricing.

5.#H40 New 360° Car Mount Adjustable Gooseneck Cup Holder Cradle for iPhone 11pro/Pro Max Samsung Huawei Xiaomi Cell Phones

For those of us who want to declutter the dashboard and keep it clean, this gooseneck cupholder phone holder is suitable for you.

It fits onto your cup holder and this keeps the phone close to your arm for easier reach and use.

Its contacts are covered with a soft cushion. This prevents it from suffering shock and vibrations.

For a variety of angle positions, the gooseneck can twist and bend to meet your demands.

Installation is super easy, the section that enters your cup holder has a lock once activated, the phone mount securely holds on to the cup holder.

This is the best phone mount for Prius if you want a clear dashboard with minimal distractions.

Click this link to check its price.

6.360° Rotation Car Mount Phone Holder Rearview Mirror Bracket Black For Cellphone Dashboard Stand Holder Car Mount Dropshipping

Last but not the list we have this phone clamp.

It attaches to your Prius windscreen using a suction cup.

Many customers love it because of its ability to adapt to many phone sizes. The clamp opens up to varying lengths to grab your phone.

It is sturdy too, meaning, it will not wobble as you move.

Specifications:

  • Adjustable rotation for 360 degrees.
  • Product fixed for windows and center console.
  • Clamp design, No tools required, easy to install and remove
  • Non-slip feet, keep your cell phone in holder steadily.

Read More: Best cell phone holders for your car

best phone mount for f150

Ford F150 has multiple locations where you can attach your smartphone mount.

best phone mount for f150
Ford f150

These includes:

  • On your Windscreen
  • In your Cup Holder
  • In your Ford’s Vent
  • On top of your Ford f150 Dashboard

We have prepared a list of phone mounts containing the best phone mounts for f150. The phone holders below can attach to any of the locations mentioned above.

5 Best phone mounts for f150

Cup Phone Holder For Car Universal Adjustable Gooseneck Portable Cup Holder

We understand that the Ford f150 owners are busy people and are almost always in a hurry to reach their next destination in time. Therefore, you would not want any destructions like live messaging taking your attention away from the road.

The cup holder phone mount above is just the perfect option for you. The cupholder is located just below the dashboard. Once you attach your phone mount to it, your smartphone notifications will never interrupt. this is because your phone is far from your visibility angle.

The phone holder is sturdy. It will firmly keep your phone in place. It rotates a full 360 Degrees to allow you to pick the best phone viewing position.

The arm on this cup holder phone holder is long and flexible too. This extends your option when it comes to choosing an angle for using your phone.

We are confident to say that this is the best phone mount for f150 drivers.

Cartoon Mobile Gravity Air Car Mobile Phone Stand

This phone mount is a good pick for Ford f150 users as well.

We like it because it is easy and simple to install and use in your Ford truck.

It utilizes gravity to automatically lock your phone in. Once your phone lands on the bottom contacts, it pulls them down and consequently activating the lock.

This gadget attaches to your ford Vents. The size is also small meaning, it will not clutter your truck’s striking dashboard. The prongs on the rear end of this mount automatically clip into your vents and no screwing is needed. It’s a plug-and-play affair.

Once properly installed, this phone mount for ford f10 is stable enough to withstand any trembling or shaking.

No Magnetic Mobile Phone Holder Universal Car Bracket

This one has multiple contact points to ensure that your phone is safe and secure.

The point retracts to accommodate your smartphone. It also adapts to your phone width size. This means you can use multiple phone width sizes with this phone mount.

It uses the gravitational pull concept to lock in the phone and also release the holders whenever you want to remove the phone.

It also has an exquisite design that complements your Ford f150 dashboard look.

15W Smart Fast Charging Mobile Phone Holder for Car

Qi-Charging is the new norm when it comes to charging smartphones today. Most smartphones come with a wireless charging mechanism built-in today.

Wireless charging eliminates the struggle of dealing with charging cables every now and then.

With this phone mount, everything in your Ford truck will look organized and pretty. It charges your smartphone immediately after you slot it in on the mount wirelessly.

It is made from ABS material and metallic holding oints. This goes to show you that this phone mount will last you for a long time.

It uses gravitational pull to trigger the locking and unlocking features.

This phone mount fits onto your Ford’s Truck Ventilation cup.

It has the capability of rotating a full 360 Degrees on the adjustable ball joint.

Read More: Best cell phone holders for your car

This phone mount oerates similary to the previous phone holder above.

The only difference is the auto clamping feature.

You can click this link to learn more about this mount.

If you are an iPhone user you can click this link to view the best phone mounts for iphones.